Analisis Sifat Mekanik Komposit Bahan Kampas Rem Dengan Penguat Serbuk Kayu Jati Dan Serbuk Kuningan


Analysis Character Of Mechanics Composite Brake Pads Material With Amplifier Teak Wood Powder And Brass Powder


  • (1) * Mochamad Hisam Alamsyah            Universitas Muhammadiyah Tasikmalaya  
            Indonesia

  • (2)  Gugun Gundara            Universitas Muhammadiyah Tasikmalaya  
            Indonesia
    (*) Corresponding Author

DOI: https://doi.org/10.21070/r.e.m.v5i1.870

Abstract

The purpose of this research for analyze composite material reinforced tesk wood powder and brass powder and epoxy resin matriks as brake pads material. The mix of composite brake pads divided into three kinds are Spesimen A, Spesimen B, Spesimen C, with different material composition next made to be mixing process, compacting, and sintering. This testing done with way test violence through Brinell method, test of wear rate use tool of Ogoshi high speed universal wear testing machine produce data of highest violence composite owned by Spsesimen A with score 10 HBN and highest wear rate owned by Spesimen C with score 0.0004 Kg/mm2. Composite material teak wood powder and brass powder and epoxy resin matriks have character of mechanics if composite have score of big violence so wear rate will more low and otherwise if composite have score of little violence so the wear rate will more high.

References

Bagaskara, A dkk. (2019). Pengaruh Serbuk Kulit Biji Mangga Sebagai Penguat Komposit Kampas Rem Terhadap Sifat Mekanis. Vol.2 No.2. Jurnal Teknik Mesin MERC. Universitas Tidar Magelang.
Callister, W. D. (2003). Material Science and Engineering: An Introduction . Jhon Willey and Sons, Inc.
Fitrianto, F.D dkk. (2013). Pemanfaatan Serbuk Tongkol Jagung Sebagai Alternatif Bahan Friksi Kampas Rem Non-Asbestos Sepeda Motor. Pendidikan Teknik Mesin. FKIP UNS. Surakarta
Haryono, A dan Nugroho. (2015). Analisa Struktur Mekanik dan Struktur Mikro Pada Piston Hasil Proses Pengecoran Tempa . Vol. 1 No. 1. ISBN. 976-602-9334-444. Fakultas Tenik. Universitas Wahid Hasyim Semarang.
Helmy. (2012). Laporan Tugas Akhir Metalurgi Serbuk . Skripsi. Program Studi Sarjana Institut Sepuluh November.
Jama . (2008). Teknik Sepeda Motor . Jakarta: Dinas Pendidikan Nasional.
Kartiwa. (2009). Peningkatan Standar Kanvas Rem Kendaraan Berbahan Baku Asbestos dan Non Asbestos (Celulose) untuk Keamanan . PT. Industri Bagas Perkasa.
Kaw, A. K (1997). Mechanics of Composite Materials. CRC. Press. New York.
Matthews, F. L. Rawlings, RD. (1993). Composite Material Engineering And Science . Imperial College Of Science, Technology And Medicine. London. UK.
Pratama. (2011). Analisa Sifat Mekanik Komposit Bahan Kanvas Rem dengan Penguat Fly Ash Batubara . Skripsi. Program Sarjana Teknik Mesin Universitas Hassanudin.
Sutanto, T.D dkk. (2016). Inovasi Penggunaan Serbuk Kayu Berpenguat Serbuk Kuningan Terhadap Sifat Mekanis Kampas Rem. ISSN. 1978-2497. ITEKS. Jurnal Nasional STT Wiworotomo Purwokerto.
Picture in here are illustration from public domain image (License) or provided by the author, as part of their works
Published
2021-01-12
 
Issue
Vol 5 No 1 (2020): Juni 2020
Section
Articles

Copyright (c) 2020 Gugun Gundara

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright Notice

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.