Static Analysis of Frame Structure of Post-Stroke Tricycle Design Based on Solidworks Software 2012 with Material Type Variations
Analisa Statik Struktur Frame Desain Sepeda Roda Tiga Pasca Stroke Berbasis Software Solidworks 2012 dengan Variasi Jenis Material
-
(1) Eko Siswono Teknik Mesin, Universitas Muhammadiyah Sidoarjo
Indonesia
(2) * Mulyadi Mulyadi
Universitas Muhammadiyah Sidoarjo
(*) Corresponding Author
Abstract
The body weight of post-stroke patients varies from one another, this can affect material selection. In this study, the researchers designed a three-wheeled frame using various types of material and the same material size including: galvanized pipe, stainless pipe (AISI 304), mild steel pipe (ASTM A36), Alloy Steel pipe to obtain a safe design for sufferers post-stroke, the skeletal design was analyzed statically using Soliworks 2012 software to obtain the results of analysis in the form of: Von Mises Voltage, Safety Factor (Strain) and Strain (Displacement). Static analysis of Post-Stroke Tricycle Design results obtained the greatest Von Mises Voltage value on ASTM A36 type material with a stress value of 154.5 N/mm2 (MPa) and the smallest stress value in Galvanized type material with a stress value of 150.8 N/mm2 ( MPa). Based on the results of the analysis of Safety Factors (Safety of Factor) so that the design can be said to be safe for patients after stroke, the type of material that must be used is Alloy Steel with a value of Safety Factor (Safety of Factor) of 5.49.
References
Rodika and M. L. Batan, “Sepeda Roda Tiga Untuk Pasien Pasca Stroke,” Jurnal Manutech, vol. 5, no. 2, pp. 8–57, 2013.
B. Setyono, “Perancangan Dan Analisis Kekuatan Frame Sepeda Hibrid “Trisona” Menggunakan Software Autodesk Inventor,” Jurnal IPTEK, vol. 20, no. 2, pp. 37–37, 2016. [Online]. Available: https://dx.doi.org/10.31284/j.iptek.2016.v20i2.43
R. Mariudin, Y. Gunawan, and Samhuddin, “Perancangan dan Analisa Frame Sepeda Pengangkut Gabah,” ENTHALPY, vol. 3, no. 4, 2018.
S. A. Alfath and A. H. A. Rasyid, “Analisa Pembebanan Dinamik pada Pengembangan Axle Main Landing Gear Pesawat Boeing 737-800 Menggunakan Pendekatan Finite Element,” Jurnal Teknik Mesin, vol. 6, no. 1, pp. 139–146, 2018.
T. Khairul, “”Desain Dan Simulasi Suspensi Sepeda Motor Dengan Solidwork,” Jurnal Rekayasa Mate- rial, vol. 1, no. 1, pp. 47–56, 2012.
Mulyadi and Ardi, “Perancangan Multipurphose Wheelchair,” Surabaya, 2012.
Copyright Notice
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
