Simulation of Waste Load Variations on Stress Analysis Results of Incinerator Wheel
Keywords:
Incinerator; Stress analysis; Fnite Element Analysis (FEA)Abstract
An incinerator is a high-temperature waste-burning device with a closed, insulated combustion chamber, designed to minimize environmental impact [1]. Modern incinerators aim to reduce inorganic waste and smoke emissions, particularly in Metro City, Lampung Province [2]. A key component is the wheel, which reduces friction and enhances mobility [3]. This study focuses on designing the incinerator wheel, determining its geometry and material, and analyzing stress, strain, and deformation through simulation [4]. The design process used Autodesk Inventor Professional, while simulations were performed in SolidWorks [5]. Tests were conducted under three load conditions: no load, 250 kg, and 500 kg. The final wheel design measures 150 mm in diameter, 50 mm in width, and 10 mm in thickness, using cast iron. Simulation results show stress, strain, and deformation remain below material limits, even at 500 kg load, confirming the wheel’s safety and reliability for optimal incinerator performance.
References
[1] Narto, A., & Utari, R. (2023). IMPLEMENTASI ALAT PEMBAKAR SAMPAH MENGGUNAKAN SMART PORTABLE INCINERATOR DALAM PENANGGULANGAN SAMPAH DARI PENGOPERASIAN KAPAL. JURNAL SAINS DAN TEKNOLOGI MARITIM, 24(1), 49-60. DOI: https://doi.org/10.33556/jstm.v24i1.350
[2] Maulana, K., Marbun, L. V., Intani, E. T., & Bimantio, M. P. (2025). Efektivitas Incinerator Rendah Emisi untuk Pengelolaan Sampah di Perumahan PT Ciliandra Perkasa, Dumai, Riau. ABDIMASKU: JURNAL PENGABDIAN MASYARAKAT, 8(2), 601-613. DOI: https://doi.org/10.62411/ja.v8i2.2934
[3] Praharsa, R., Asroni, A., & Surono, B. (2023). DESIGN, MODELLING DAN STRESS ANALYSIS PADA FRAME INCINERATOR DENGAN VARIASI BEBAN DARI SAMPAH ANORGANIK. Turbo: Jurnal Program Studi Teknik Mesin, 12(2). DOI: http://dx.doi.org/10.24127/trb.v12i2.3008
[4] Asroni, A., & Irawan, D. (2017). Stress Analysis Piston Sepeda Motor Menggunakan Software Autodesk Inventor 2015. Turbo: Jurnal Program Studi Teknik Mesin, 6(1). DOI: http://dx.doi.org/10.24127/trb.v6i1.465
[5] Amrulloh, M., Nugroho, E., & Asroni, A. (2021). Perancangan dan analisis electric car frame “Melumumet” menggunakan software Autodesk Inventor 2016. ARMATUR: Artikel Teknik Mesin & Manufaktur, 2(1), 41-46. DOI: https://doi.org/10.24127/armatur.v2i1.742
[6] Maulidya, A. (2025). Kajian Tentang Kota Berkelanjutan di Indonesia (Studi Kasus di Kota Metro, Lampung). Arus Jurnal Sosial dan Humaniora, 5(1), 850-861. DOI: https://doi.org/10.57250/ajsh.v5i1.1147
[7] Afriliana, R., Wijaya, C. A., Himawati, I., Iresha, F. M., Mubarok, H., & Wahyuni, E. (2025). Pembuatan Alat Penghancur Sampah Infeksius Jenis Popok dan Pembalut Sekali Pakai untuk Optimalisasi Pengelolaan Sampah TPS3R Desa Tanjungrejo. Journal of Appropriate Technology for Community Services, 6(1), 40-51. DOI: https://doi.org/10.20885/jattec.vol6.iss1.art5
[8] Gunawan, G., Supardin, S., Ruhana, R., & Juhan, N. (2025). Implementasi Insinerator untuk Pengolahan Sampah di Desa Alue Lim Lhokseumawe. Jurnal Vokasi, 9(1), 76-85. DOI: http://dx.doi.org/10.30811/vokasi.v9i1.6527
[9] Fuadi, M., Widhiantari, I. A., Puspitasari, I., Ridho, R., AP, Y., Rizal, M. K., & Azmi, M. H. (2025). Penerapan Incinerator Pemusnah Sampah Di Desa Pakuan, Narmada, Lombok Barat. Jurnal Pengabdian Magister Pendidikan IPA, 8(2), 445-450. DOI: 10.29303/jpmpi.v8i2.11494
[10] Agustina, S. E., Pane, E. A., & Nurcholis, M. F. (2022, June). Design Development of Portable (Mini) Multi-function Incinerator for Dry Medical Waste Handling. In IOP Conference Series: Earth and Environmental Science (Vol. 1038, No. 1, p. 012057). IOP Publishing. https://doi.org/10.1088/1755-1315/1038/1/012057
[11] Asmara, S., Jati, D. P., Kuncoro, S., & Warji, W. (2024). Desain Insinerator Tipe TEP-1. Jurnal Agricultural Biosystem Engineering, 3(3), 373-381. DOI: https://doi.org/10.23960/jabe.v3i3.9945
[12] Abid, Z. A., Syamsuri, H., & Herdiana, A. (2023). Perancangan Sistem Insinerator Sampah Plastik Layak Bakar Ramah Lingkungan Di Kampus Unigal Ciamis. Jurnal Ilmiah Teknologi Infomasi Terapan, 9(2). DOI: https://doi.org/10.33197/jitter.vol9.iss2.2023.1041
[13] Prasetyo, A., Sihole, A. T. P., Khairunisa, M. D., Najibbulloh, M., & Atmayati, R. (2025). Implementasi Software Solidworks dalam Perancangan Produksi Lemari untuk Efisiensi Waktu Produksi. SCIENTIFIC JOURNAL OF REFLECTION: Economic, Accounting, Management and Business, 8(1), 164-169. DOI: https://doi.org/10.37481/sjr.v8i1.1030
[14] Imron, J. (2025). Analisis Desain dan Keandalan Bejana Bertekanan pada Industri Energi Pendekatan Numerik dan Eksperimental. JURAL RISET RUMPUN ILMU TEKNIK, 4(1), 48-59. DOI: https://doi.org/10.55606/jurritek.v4i1.4474
[15] Mulyana, A. S., Tumpu, M., Rachman, M. R., Pasoepati, I. G. P. A. G., Saeni, A. A., Rangan, P. R., ... & Gusty, S. (2020). Pengembangan inovasi dan teknologi di era revolusi industri 4.0: konsep dan penerapan: Inovasi dan Teknologi. Tohar Media.
[16] Listiana, H., & Anam, K. (2025). Strategi Penyusunan Kerangka Berpikir: Meningkatkan Kualitas Penelitian. JURNAL LENTERA: Kajian Keagamaan, Keilmuan dan Teknologi, 24(1), 146-157. DOI: https://doi.org/10.29138/lentera.v24i1.1197
[17] Efendi, A. R. (2024). Perancangan dan Simulasi Struktur Platform Untuk Mesin Filter Press di PT. XYZ dengan Metode Finite Element Analysis (Doctoral dissertation, Fakultas Teknik Universitas Sultan Ageng Tirtayasa). DOI: https://doi.org/10.58344/jig.v3i6.356
[18] Fatmawati, I. R., & Maruf, A. (2024). Simulasi Pengelolaan Sampah di Pasar Tohaga Cileungsi Kabupaten Bogor. Karimah Tauhid, 3(4), 4703-4715. DOI: https://doi.org/10.30997/karimahtauhid.v3i4.12895
[19] Widiastuti, H., & Albana, M. H. (2025). PEMODELAN DAN ANALISIS EYEBOLT TERHADAP BEBAN DAN SUDUT ANGKAT MENGGUNAKAN FINITE ELEMENT ANALYSIS. SINERGI POLMED: Jurnal Ilmiah Teknik Mesin, 6(2), 39-49. DOI: https://doi.org/10.51510/sinergipolmed.v6i2.2556
[20] Lesmana, I. G. E., Sihombing, B. F., Hartanrie, R. C., & Aldito, D. (2025). Perancangan Alat Pengolah Limbah Plastik Jenis PET (Polyethylene Terephthalate) Kapasitas 3 kilogram dengan Menggunakan Kompor Oli Bekas. Jurnal Teknik Mesin, 18(1), 122-128. DOI: https://doi.org/10.30630/jtm.18.1.1771
Published
Issue
Section
License
Copyright (c) 2025 Asroni, Bambang Surono, Hendri Yonatan
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright Notice
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
