Using the MPX5500DP Sensor for Monitoring Microcontroller-Based HVAC Systems and IOT Penggunaan Sensor MPX5500DP Untuk Monitoring Sistem HVAC Berbasis Mikrokontroler dan IOT

Main Article Content

Rizki Aulia Nanda
Agus Supriyanto
Karyadi
Fathan Mubina Dewadi

Abstract

MPX5500DP is a sensor designed to measure how much air pressure is traveling in a channel or piping system. The MPX5500DP sensor has an analog output value that can be converted into a digital signal to display data on how much air pressure is being generated. By utilizing the MPX5500DP sensor the purpose of this study is to measure air pressure in HVAC systems with Micro SD data storage and IOT (Internet Of Things) based Web Browsers. The method used in implementing the MPX5500DP sensor is, selecting materials, making tools, installing sensors and testing. The test results obtained from Micro SD storage are the average air pressure value of 15.76 kPa. The IOT test produced an average air pressure of 15.67 kPa. At the time of testing, there were problems where data transmission was very slow so that for 30 minutes the test only received 14 air pressure data that were read on the Web Browser, namely ThingSpeak. However, the IOT test on an air pressure gauge using the MPX 5500DP sensor was successful. The success of the IOT system in monitoring HVAC air pressure can assist in monitoring the HVAC system in multi-storey buildings.

Article Details

Section
Articles

References

[1] Freescale, “Freescale Semiconductor Integrated Silicon Pressure Sensor On-Chip Signal Conditioned , Temperature Compensated and Calibrated,” Sensors (Peterborough, NH), pp. 2007–2009, 2009.
[2] S. Ilman and E. Wahyuningsih, “Portable Spirometer Using Air Pressure Sensor MPX5500DP Based on Microcontroller Arduino Uno S,” ICETLAWBE 2020, 2020, doi: 10.4108/eai.26-9-2020.2302783.
[3] W. Wu, H. M. Skye, and P. A. Domanski, “Selecting HVAC systems to achieve comfortable and cost-effective residential net-zero energy buildings,” Appl. Energy, vol. 212, no. November 2017, pp. 577–591, 2018, doi: 10.1016/j.apenergy.2017.12.046.
[4] C. T. Helena Manurung, J. Arifin, F. T. Syifa, and R. A. Rochmanto, “Pemanfaatan ESP32 Sebagai Sistem Pemantauan Kualitas Air Keran Siap Minum Secara Real-Time Menggunakan Aplikasi,” J. Telecommun. Electron. Control Eng., vol. 4, no. 2, pp. 93–98, 2022, doi: 10.20895/jtece.v4i2.535.
[5] H. Kusuma, F. Ramadhan, A. A. Alawi, R. Nauval, and J. Setiawan, “Prototype Pendeteksi Kebocoran Pipa Berbasis Iot Menggunakan Nodemcu Esp8266 Melalui Dashboard Adafruit.Io,” J. Teknol. Dan Sist. Inf. Bisnis, vol. 3, no. 2, pp. 327–333, Jul. 2021, doi: 10.47233/jteksis.v3i2.253.
[6] S. Karimi, P. Poure, and S. Saadate, “An HIL-based reconfigurable platform for design, implementation, and verification of electrical system digital controllers,” IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1226–1236, Apr. 2010, doi: 10.1109/TIE.2009.2036644.
[7] S. E. L. Barrak et al., “IoT-Based Smart Airflow System for Retrofitting Commercial Variable Air Volume HVAC Systems,” IFAC-PapersOnLine, vol. 55, no. 12, pp. 444–449, 2022, doi: 10.1016/j.ifacol.2022.07.352.
[8] A. Saefullah, D. Immaniar, and R. A. Juliansah, “SISTEM KONTROL ROBOT PEMINDAH BARANG MENGGUNAKAN APLIKASI ANDROID BERBASIS ARDUINO UNO,” CCIT J., vol. 8, no. 2, pp. 45–56, 2015.
[9] R. I. Putri, M. Rifa, and A. N. Anjarsari, “Sampah Rumah Tangga Menggunakan MPX5500DP,” Maj. Ilm. Teknol. Elektro, vol. 19, no. 1, pp. 61–66, 2020.
[10] R. Rizki Aulia Nanda, Jati and L. A. Kurniawan, “PERANCANGAN DAN PERAKITAN ELEKTRONIKA MIKROKONTROLER BERBASIS IOT UNTUK STUDI PENGUKURAN SISTEM HVAC,” Buana Ilmu, vol. 7, no. 1, pp. 43–55, 2022.
[11] J. Pérez-Padillo, J. G. Morillo, J. Ramirez-Faz, M. T. Roldán, and P. Montesinos, “Design and implementation of a pressure monitoring system based on iot for water supply networks,” Sensors (Switzerland), vol. 20, no. 15, pp. 1–19, 2020, doi: 10.3390/s20154247.