Perancangan Alat Pengering Kerupuk dengan Menggunakan Pemanas Heater
Design of a Cracker Dryer Using a Heater
-
(1) Mohammad Sandoyo Adamsyah
Teknik Mesin, Universitas Muhammadiyah Sidoarjo
Indonesia
(2) * Mulyadi Mulyadi
Teknik Mesin, Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
Drying is the process of reducing water content to reach a certain moisture content. The drying process of mussel cauliflower in Balongdowo village still relies on sunlight in the drying process. Drying with this process is considered to be less efficient because when the hot rainy season the sun is unpredictable and requires extensive land in the drying process. To overcome this problem, in this final project, the title of the design of cracker dryer is taken using heater heater. Which is expected to increase effectiveness and productivity when the rainy season arrives can also reduce the time and production costs. The method used to solve these problems is to use the bootroyd design method which is designing a dryer that consists of the main components of the drying chamber, conveyor, drive motor and gearbox. The results of the test showed that the drying time of 76 seconds reduced the initial water content of 70% reduced to 15% the water content contained in crackers.
References
R. S., “Pariwisata Kreatif Strategi Menghadapi Masyarakat Ekonomi Asean (MEA),” 2018. [Online]. Available: 10.31227/osf.io/ftvs4
J. Sirait, “Pembuatan Alat Pengering Kerupuk Rambak dengan Kapasitas 30 Kg,” J Ris Teknol Ind, vol. 7, pp. 118–118, 2016. [Online]. Available: 10.26578/jrti.v7i14.1540
Wijoyo et al., “Rekayasa Alat Pengering Untuk Meningkatkan Prokdivitas UKM Emping Mlinjo,” Teknik Mesin Universitas Surakarta, 2010.
Y. Witdarko, N. Bintoro, B. Suratmo, and B. Rahardjo, “Pemodelan pada Proses Pengeringan Mekanis Tepung Kasava dengan Menggunakan Pneumatic Dryer: Hubungan Fineness Modulus dengan Variabel Proses Pengeringan,” J Agritech, vol. 35, pp. 481–481, 2015. [Online]. Available: 10.22146/agritech.9333
M. Mahmuddin, “Karakteristik Perpindahan Panas pada Pipa Penukar Kalor Selongsong Aliran Searah Vertikal,” J Chem Process Eng, vol. 1, pp. 30–30, 2016. [Online]. Available: 10.33536/jcpe.v1i2.68
F. P. Incropera, D. P. Dewitt, and R. S. ., “ Introduction to Heat Transfer,” and others, Ed. John Wiley & Sons, Inc. New York, 2002.
“Rancang Bangun Mesin Perontok Padi Portabel dengan Penggerak Mesin Sepeda Motor,” J Elem, vol. 4, pp. 35–35, 2017. [Online]. Available: 10.34128/je.v4i1.7
Copyright (c) 2019 Mohammad Sandoyo Adamsyah, Mulyadi Mulyadi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright Notice
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
